DIY Mini Book Press

001 Samples

Left to Right Top: Soft cover monastery stitch, Hardcover monastery stitch, French stitch. Left to Right Bottom: Hardcover Coptic stitch, soft cover long stitch, soft cover Japanese stitch

Some time ago (about a year I think) I took an art class that taught me how to bind books. It was one of the most amazingly fun classes I’ve ever taken! I learned 6 different binding styles and made 9 sample books – 3 7/16in. x 5in. For an avid reader like myself, learning how books can be constructed increased my appreciation for the books themselves (even though it’s rare for books to be bound by hand these days).

One of the things that makes a book look nice is flat pages. If you’ve ever tried folding multiple pages at once, you might notice that they tend to pop up at the spine. In class we used a paper-wrapped brick to combat this. While browsing YouTube, I found a diy alternative! Sea Lemon’s video How to Make a Book Press tutorial HERE . The materials were cheap and pretty easy to find (with a couple modifications).

001

Left to Right: Dollar Tree furniture sliders, 2 hex bolts (6in.), 2 washers, wing nuts, 7in. x 9in. wooden plaques

The trickiest part of the whole project was making holes in the wood without a drill… Gave myself at least 4 hand bruises trying to press down while turning a + screwdriver. It took me over an hour to get most of the way through the first of 2 holes. Then my husband took over and finished both of them in a matter of minutes … Not sure if I should be annoyed or pleased … ^_^

004I taped both pieces of wood together – so the hex bolts would pass through both pieces correctly – but the hole I made was angled – ugh. Also it was a bit of a tight fit which was fine for one underneath. To get the top one to slide up and down – somewhat – smoothly, I used a – screwdriver that was slightly wider to enlarge the holes on top. Even so, because of my inability to drill straight down I have to pull the two hex bolts slightly apart as I slide the top up and down.

Once the hex bolts were through, I threaded each with a washer and a wing nut. The final touch was the felt sliders on the bottom … and All Done!

finishedBoth wooden pieces are unfinished so I plan to paint/decorate them eventually. Also, the boards I used aren’t long enough for making larger books (like folding regular letter sized paper in half hamburger-wise), but I am excited to make mini books (cutting regular paper in half and then folding in half again, both hamburger-wise). Look forward to updates of that nature ^_~ !

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: